PAS 1188-4:2009 Flood protection products. Specification. Part 4: Demountable products
PAS 1188-4 specifies requirements for the designation, testing, factory production control, installation documentation and marking for different types and configurations of demountable flood protection products.
A demountable flood protection product is defined as a flood protection product that is capable of being removed and reinstalled on permanent mountings. It is for use away from buildingsand may be sealed against structures or buildings at section ends.
PAS 1188-4 is for use in the UK or locations with similar exposures, i.e. where there is a temperate climate and advanced warning of flooding is available.
Together with PAS 1188-2:2009, this part of PAS 1188 replaces PAS 1188-2:2003, which is withdrawn.
For flood protection products certified against PAS 1188-2:2003, you are advised to discuss transition arrangements with your certification body.
PAS 1188-4 does not apply to flood protection products for installation across building apertures such as individual doors, windows, air-bricks and air vents or around buildings; these are covered by PAS 1188-1 and PAS 1188-3.
It also is not applicable to temporary flood protection products which are not location specific in their use, are intended to be wholly installed during a flood event and wholly removed afterwards; these are covered by PAS 1188-2.
PAS 1188-4 does not specifically test flood protection products for coastal conditions. Where flood protection products are intended for coastal conditions, advice on suitability should be obtained from the manufacturer.
Contents of PAS 1188-4:
Foreword
1 Scope
2 Terms and definitions
3 Requirements
3.1 Design
3.2 Designation
3.3 DMWD
3.4 Installation and removal of a flood protection product
3.5 Leakage
3.6 Product guide/user manual
3.7 Factory production control
3.8 Marking
Annexes
Annex A (informative) Definitions of demountable flood protection products
Annex B (normative) Method of test for leakage and movement
Annex C (normative) Product guide/user manual
Annex D (normative) Requirements for factory production control
Bibliography
List of tables
Table 1 – Wave protection categories
Table B.1 – Wave and current testing depths
Other titles in the PAS 1188 series:
PAS 1188-1:2009 Flood protection products. Specification. Part 1: Building aperture products
PAS 1188-2:2009 Flood protection products. Specification. Part 2: Temporary products
PAS 1188-3:2009 Flood protection products. Specification. Part 3: Building skirt systems
You might also be interested in: